Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser protects your car from key-long theft and relay theft. With a personalised PIN sequence, unless they have the correct code, your car won't be able to start!
It also has Transport Mode that allows you to disable the device temporarily and is perfect for vehicle transportation and servicing. The device is then activated by entering a new PIN code.
No Key Fobs or Led Indications
The Ghost 2 immobiliser offers a strong defense against modern car theft techniques. Its unrecognizable installation and engine stop-blocking can reduce the chance of your vehicle being stolen, which can offer peace of mind, and may even reduce insurance premiums.
It cannot be detected by scanners, and cannot be hacked using standard methods like key cloning or signal jamming. The device utilizes buttons on your vehicle, for instance those found on the steering wheel and door panels, to generate an individual PIN code that can be changed. This sequence can last up to 20 presses. If the correct sequence is entered, or if a beacon or mobile app is employed, only the vehicle owner is able to start the engine, thereby providing an extra layer of protection against thieves.
You can also enable the service mode to help in situations such as valet parking or servicing that require you to temporarily disable the system. This can be done quickly and easily via an app on your mobile, ensuring that your car remains secure whilst being repaired. Once the job is completed it is easy to switch back to secure mode. This ensures that your vehicle is protected in all times.
The Ghost 2 is far more convenient to use than other systems that require a fob. The application can also be used as a spare key in emergency situations. This lets you drive with your security shut off, without needing to enter a PIN code.
No Radio Frequency Signals
The Ghost 2 immobiliser is not like traditional security systems, which require a separate remote control. It is operated using the existing buttons on your steering wheel or console. It is indetectable by thieves who employ the RF scanning technology or code grabbing, which means your car won't start if they manage to get your key.
The device uses a unique 'password' sequence of buttons to lock the engine. The personalised PIN code can be entered through the app or using the buttons on the steering wheel and on the centre console. This lets you secure the gearbox as well, meaning your car cannot be driven away until you have a key in your possession or are able to enter your pin code. The device can be set to transport mode, which allows you to drive your vehicle without entering your PIN code. This will provide extra protection for your vehicle if it is left to valet or service.
The Ghost 2 immobiliser is designed to be a theft deterrent that is as discreet as it can be, making it an appealing alternative for those who have spent an enormous amount of money customising their vehicles or own rare or expensive cars. Many have stated that this is a fantastic method to safeguard their vehicles from being stolen and some have even shared stories of attempted thefts that have been blocked by the device. The Ghost 2 also offers a large amount of flexibility and customers have reported that it can be used with regular car keys and also with the emergency button in their vehicle, which gives them peace of mind while they are away from their vehicle.
No Radio Frequency Scanners
Ghost immobilisers guard your vehicle from key theft and cloning. The system makes use of the buttons on your vehicle, for example the ones on the dashboard and your steering wheel to create a unique, changeable sequence of buttons that only you know. Your car won't start without this sequence. This combination of a unique disarm sequence and the absence of radio frequency signals makes the device extremely difficult to penetrate or bypass.
The Ghost CAN Immobiliser is a better alternative to devices approved by Thatcham that rely on radio frequencies scanning. It operates completely silently, without external signals and does not depend on any external signals. It's a much more secure alternative and offers insurance-approved status when it's installed by a TASSA approved installer (we're one of them! ).
Because of ghost 2 immobiliser near me and way in which the Ghost immobiliser integrates with your vehicle, it is strongly advised to have an experienced installer perform its installation. This ensures that it is integrated seamlessly with the vehicle's systems, resulting in optimal performance and a considerably lower chance of malfunction.
Professional installation is usually supported by warranties and service to increase the value of your purchase. This is a major deterrent to potential thieves who are less likely to try and bypass the device due to its numerous security features.
The Ghost is not just an effective deterrent to thieves, but it's designed to be easy to use. It can be set to automatically re-arm for a specific period of time after parking your car. This means that you don't have to remember your PIN code every time. It also provides the flexibility of Service/Valet Mode when you need to turn your vehicle to a service or valet parking. This can be enabled or disabled based on your preference using an easy indication sequence.
No Wire Cutting
The Ghost 2 is non-invasive and does not require cutting of wires during installation. It connects to the vehicles CAN data network and is equipped with a unique PIN code, preventing anyone else from starting your engine if they do not have a personal PIN sequence or app authorisation.
It is also silent because it doesn't emit radio signals like other immobilisers. It is weatherproof, sealed, and small enough to hide anywhere within the vehicle.
The Ghost II also has the ability to be switched into 'transport mode which allows it to be used for short durations without the need for a separate PIN. This is a great option for situations like lending the car to a friend or family member or in an emergency. You can start your vehicle quickly and safely.
When installing the Ghost II, it's important to work in a well-lit space and wear protective gear when working with tools and electrical components. A basic set of hand tools will allow you to make precise connections while a multimeter will help verify electrical values and ensure your wiring is safe. Insulation tape and cable ties can also be used to protect or rejoin any cut or exposed wires during the installation process.
It's also important to disconnect the battery before trying any wiring work on your vehicle. This will stop any accidental airbag deployments or electrical shocks from happening if the battery is accidentally disconnected while the Ghost II is still connected to the system of your vehicle.
Easy to Install
The Ghost immobiliser, a distinctive device that is the next generation, operates by connecting directly to your vehicle's CAN Data Network. It utilizes a unique pin code to stop it from beginning. This makes it much harder to break than conventional key fobs and alarm systems, and provides superior security against key cloning hacking, as well as relay attacks.
The device can be hidden inside your vehicle. it utilizes the buttons on the dashboard and your steering wheel to create a unique sequence you only know. This stops thieves from using a stolen car key to start it and also wards off the use of a diagnostic tool which thrives on hacking OBD.
Installation is simple and does not require cutting wires. The unit connects to the vehicle's CAN bus system via a continuous 12V supply as well as an earth connection. A multimeter is required to identify the correct wires. Basic hand tools can be used for the installation. To shield the connections from damage, insulation tape or heat shrink tubes are suggested. Cable ties can be used to keep the wiring tidy.
Once it is installed, the device enters into a learning mode that captures your specific buttons or sequences in order to generate your unique pin code. This information is stored in the CAN network which makes it virtually impossible for anyone else to duplicate your sequence and start your vehicle.
Should you ever forget your PIN Code or sell your car, or an option becomes unavailable, there is an emergency override feature called Transport Mode. This will shut down the Ghost System completely, however it will automatically reactivate whenever you exceed 31mph for longer than 15 minutes or enter your PIN Code. This is great for those who regularly rent out their vehicles on services such as Turo or ZipCar.